Follow Us:

IVDR CE Marking

Home IVDR GSPR Checklist
Home  ›  IVDR  ›  IVDR GSPR Checklist

IVDR GSPR Checklist

The IVDR GSPR checklist shows how your in vitro diagnostic device meets the General Safety and Performance Requirements in Annex I of Regulation (EU) 2017/746. It links each requirement to the standards, test reports and documents that prove conformity. This guide explains the three GSPR chapters, what a notified-body-ready checklist contains and how I3CGlobal helps you build it.

The basics

What Are the IVDR General Safety and Performance Requirements?

Every in vitro diagnostic device must be safe and must perform as the manufacturer claims. In other words, it should achieve its intended purpose with an acceptable level of risk. The IVDR General Safety and Performance Requirements (GSPR) set out these expectations in Annex I of Regulation (EU) 2017/746.

The European Commission published the EU MDR and EU IVDR on 5 April 2017. The IVDR replaced the In Vitro Diagnostic Medical Devices Directive 98/79/EC (IVDD) and its Essential Requirements with 20 broader and more detailed GSPRs.

To place a device on the EU market, you must show conformity with every applicable GSPR. You must also meet the related legal requirements for risk management, quality management and performance evaluation.

Annex I at a glance

20General safety and performance requirements
3Chapters in Annex I
8General requirements in Chapter I
A–DRisk classes that set the depth of evidence
Annex I

Important Sections of the IVDR GSPR Checklist

Annex I of EU IVDR 2017/746 groups the general safety and performance requirements for IVDs into three chapters. Your checklist should follow the same structure, so a notified body reviewer can trace each clause quickly.

01

Chapter I – General requirements

GSPR 1 to 8. Safety and performance, benefit-risk, the risk management system, risk control measures and use error.

02

Chapter II – Performance, design and manufacture

GSPR 9 to 19. Performance characteristics, materials, contamination, measuring function, software, energy sources and self-testing.

03

Chapter III – Information supplied with the device

GSPR 20. Requirements for the label, sterile packaging information and instructions for use.

Chapter I – General Requirements (GSPR 1–8)

Chapter I has eight clauses. Compared with the IVDD, it puts much more weight on risk management across the whole device lifecycle.

  • Safety and performance of the device for its intended purpose
  • Reducing risks as far as possible without harming the benefit-risk ratio
  • Establishing, implementing, documenting and maintaining a risk management system
  • Risk control measures in design and manufacture
  • Reducing risks related to use error, ergonomics and the user’s environment
  • Keeping performance stable over the device’s lifetime
  • Protection during transport and storage through suitable packaging
  • Minimising known and foreseeable risks and undesirable side effects

Chapter II – Requirements Regarding Performance, Design and Manufacture (GSPR 9–19)

GSPRRequirementTypical evidence
9Performance characteristicsAnalytical and clinical performance data, performance evaluation report
10Chemical, physical and biological propertiesMaterial specifications, compatibility and stability studies
11Infection and microbial contaminationSterilisation validation, packaging and cleanroom controls
12Devices with materials of biological originSourcing, donor screening and viral inactivation records
13Construction and interaction with the environmentInteroperability, storage and environmental testing
14Devices with a measuring functionMetrological traceability, calibrators and control materials
15Protection against radiationRadiation safety assessment, where applicable
16Electronic programmable systems and softwareSoftware lifecycle (IEC 62304), validation and cybersecurity
17Devices connected to or equipped with an energy sourceElectrical safety and EMC test reports
18Protection against mechanical and thermal risksDesign verification and hazard testing
19Self-testing and near-patient testingUsability studies with intended lay or near-patient users

Chapter III – Requirements Regarding Information Supplied with the Device (GSPR 20)

GSPR 20 covers everything the user receives with the device. It includes general labelling requirements, information on the label, information on packaging that maintains sterility, and the instructions for use. Many manufacturers use harmonised standards such as EN ISO 15223-1 for symbols and EN ISO 18113 for IVD labelling to support this chapter.

Annex II

IVDR GSPR and Technical Documentation

Under Annex II of EU 2017/746, the GSPR checklist is part of your IVDR technical documentation. It must cross-reference the objective evidence that shows your device conforms to the IVDR. For each requirement in Annex I, the checklist should show:

  1. ApplicabilityWhether the GSPR applies to the device, with a clear explanation when it does not.
  2. Method of conformityThe method used to demonstrate conformity, such as testing, analysis or clinical data.
  3. Standards and Common SpecificationsThe harmonised standards, Common Specifications or other solutions applied.
  4. Justification and V&VJustification, verification and validation of the solutions adopted.
  5. Controlled document referencesExact references to the documents in the technical file that hold the evidence.
  6. QMS evidenceQuality management system records, verification and validation reports that support each clause.

Tip: Keep the checklist a living document. Update it whenever a design change, a new standard version or post-market data affects a requirement.

Risk class

Why the GSPR Checklist Matters for Every IVD Class

The EU IVDR sorts in vitro diagnostic devices into four classes: Class A, Class B, Class C and Class D. The class depends on the intended purpose and the inherent risk of the device, and it replaces the list-based approach of Annex II of the IVDD. As a result, most IVDs that were self-certified under the IVDD now need a notified body review to obtain IVD CE marking. Check your device class with our IVDR classification guide and the official MDCG 2020-16 classification guidance.

ClassRisk levelNotified body review of the GSPR checklist
Class ALow individual and public health riskSelf-declared (notified body involved for sterile aspects of Class A sterile devices)
Class BModerate individual risk, low public health riskYes, sampled technical documentation
Class CHigh individual risk or moderate public health riskYes, sampled technical documentation for each generic device group
Class DHigh individual and public health riskYes, full technical documentation assessment for each device

Whatever the class, the GSPR checklist is mandatory. Notified bodies use it as a map to your technical file, so a clear, well-referenced checklist shortens the review. You can find IVDR-designated notified bodies in the European Commission’s NANDO database.

Why I3CGlobal

Expert IVDR GSPR Support

I3CGlobal provides complete EU 2017/746 consulting services to diagnostic device manufacturers of all sizes and specialities. Our IVDR consultants prepare and review GSPR checklists that stand up to notified body scrutiny, in line with the latest MDCG guidance documents.

  • Clause-by-clause GSPR gap assessment against your current file
  • Selection of the latest harmonised standards and Common Specifications
  • Cross-referencing to risk management, performance evaluation and labelling
  • Support with notified body questions until CE certification
Work with I3CGLOBAL

Get a Notified-Body-Ready IVDR GSPR Checklist

Our IVDR consultants prepare, review and maintain your GSPR checklist for Class A through Class D devices.

Start your IVDR GSPR project

Share your device details and get a tailored proposal.

Request a QuoteSee Pricing

Resources

Buy the IVDR GSPR Checklist Template

Save time with a ready-to-use template that follows the structure of Annex I. Our technical specialists prepared it from years of hands-on IVDR project work.

IVDR GSPR Checklist Template

  • All Annex I clauses for Chapters I, II and III
  • Columns for applicability, method, standards and evidence
  • Editable format, ready for your technical file
300 USDTemplate ID: IVDR-GSPR-01Buy Template

*The IVDR GSPR checklist template was prepared exclusively on the basis of our expertise and skills by our technical specialists. If notified bodies or other technical specialists in this sector identify any errors in it, no objections will be heard. All rights are reserved by I3CGlobal.

FAQs

IVDR GSPR Checklist: Frequently Asked Questions

What does GSPR stand for in the IVDR?

GSPR stands for General Safety and Performance Requirements. They are listed in Annex I of Regulation (EU) 2017/746 and every IVD must meet the requirements that apply to it before CE marking.

How many GSPRs are there in the IVDR?

Annex I of the IVDR contains 20 general safety and performance requirements, grouped into three chapters: general requirements (1–8), performance, design and manufacture (9–19) and information supplied with the device (20).

How is the IVDR GSPR different from the IVDD Essential Requirements?

The GSPRs replace the Essential Requirements of Directive 98/79/EC. They are more detailed and add stronger requirements on risk management, software, cybersecurity, usability for self-testing and the information supplied with the device.

Is the GSPR checklist part of the technical documentation?

Yes. Annex II requires manufacturers to document how the device conforms to Annex I. The GSPR checklist is the usual way to do this, with references to the evidence held in the technical file.

Do Class A IVDs need a GSPR checklist?

Yes. All classes must demonstrate conformity with the applicable GSPRs. For non-sterile Class A devices the manufacturer self-declares conformity, but the checklist and supporting evidence must still be available to competent authorities.

Can a GSPR be marked “not applicable”?

Yes, but each non-applicable requirement needs a clear justification. Notified bodies look closely at these justifications, so avoid generic statements.

Which standards support the IVDR GSPR checklist?

Common examples include EN ISO 14971 for risk management, EN ISO 13485 for quality management, IEC 62304 and IEC 62366-1 for software and usability, EN ISO 15223-1 for symbols and EN ISO 18113 for IVD labelling. Always check the latest harmonised versions and any Common Specifications that apply.


Updated | Author: Sobha Augustine, Founder, I3CGLOBAL | Reviewed by: Swathi Tummala, Senior Regulatory Consultant, I3CGLOBAL